Ohlins HO 819 Mounting Instructions Download Page 2

Page: 2 / 4

MOUNTING INSTRUCTIONS

1.
Put the motorcycle on a work stand so that the
rear wheel barely touches the ground. Make
sure the motorcycle is in a stable position.

Warning!

It is advisable to have an Öhlins dealer install the shock

absorber.

Warning!

If working on a raised vehicle, ensure it is securely

supported so that it will not tip over.

Note!

Before mounting this product clean the vehicle

thoroughly.

Note!

When working on this product, always see the Vehicle

Service Manual for vehicle specific procedures and

important data.

2.
Uninstall the standard shock absorber by
loosening the upper and lower mounting bolts.

①②

Summary of Contents for HO 819

Page 1: ...off the excessive oil grease with a cloth Warning Before installing this product read the hlins Owner s Manual The shock absorber is an important part of your vehicle and will affect the stability No...

Page 2: ...install the shock absorber Warning If working on a raised vehicle ensure it is securely supported so that it will not tip over Note Before mounting this product clean the vehicle thoroughly Note When...

Page 3: ...ws are tightened to the correct torque and that nothing fouls or restricts movement of the shock absorber when the suspension is fully compressed or extended Tighten at a torque value as specified in...

Page 4: ...to recommended Set up Data Read about adjustments and setting up in the hlins Owner s Manual before you make any adjustments Contact an hlins dealer if you have any questions about setting up ADJUSTME...