1-2
1.5 Install
1)
If other application software programs are open, terminate all of them.
2)
It the data viewer has been already installed, delete it from “Add/Remove Programs” on Control
Panel.
3)
Set CD-ROM in the personal computer drive.
4)
The menu is automatically displayed. Follow the instructions on the screen. If the menu is not
displayed, please start “index.htm” that CD-ROM drive has. The menu for the installation is
displayed, and please installs it according to the instruction of the screen. The Data Viewer and the
Parameter Loader are installed at the same time.
※
When you install the differing version, ".NET Framework" may need to be installed.
In that case, install software after installing ".NET Framework." .
(In the case of Windows8, environment connectable with the Internet is required for installation
of ".NET Framework".)
5)
A message is displayed, prompting you to verify that “Data display setup is complete”.
Now, the Data Viewer installation is completed.
1.6 Uninstall
Please uninstall the Data Viewer by the following operations, and delete it according to the
instruction of Windows (Notes are included).
The Data Viewer and the Parameter Loader are uninstalled at the same time.
“START of Windows”
⇒
“Control Panel”
⇒
“Add/Remove Programs”
⇒
“VM7000A_B”
When you install the differing version, before installing the upcoming version, please uninstall the
software that is now by the above-mentioned method.
There is a possibility of not operating
normally.
