Ohkura RM10C, Instruction Manual

Page: 62 / 119

―
61
―
HXPRM10mnC0001E
7.1.5 Setting the Date and Time
Operation
The following describes how to set the date/time of the internal clock.
Example) When setting the date and time to January 1st, 2000, 6:00.
Hold down the
“
MENU
”
key for 3 seconds or more
to enter the setup mode. Use the
△
key to display
" ," and press the
“
ENT
”
key.
Set the year. Use the
△
key to select a numeral,
and use the key to shift a digit.
Press the
“
ENT
”
key.
Set the month and day.
Operate in the same manner as setting the year.
Set the time (hours and minutes).
Operate in the same manner as setting the year.
Press the
“
ENT
”
key. To return to the user mode,
hold down the
“
MENU
”
key for 3 seconds or more.
[Note]
Restriction of printing
by chart speed
When the chart speed is 0
㎜
/h, it’s printed with forcible chart feed. (When the chart speed is more than 120
㎜
/h, not printing as shown the Table above.) List Print, Engineering List Print , Manual Print (key), DI
Comment print (ASync.) , DI Date and Time print (ASync.) , DI Manual print (ASync.) , Logging print (ASync.)
and Record Start/end print (ASync.) is printed regardless of the chart speed.
Print type Chart speed
（㎜
/h
）
Alarm occurrence print, Alarm recovery print, Affix print,
DI Comment print (Sync.), DI Date and Time print (Sync.),
DI Manual print (Sync.),Record Start/End Print(Sync.)
1
～
100
Logging print (Sync.) 10
～
100
[Note]
If you enter a non-existent dates or time, displays an error .
Press the
“
ENT
”
key and re-enter a correct numeral.
MENU
ESC
3sec
PRINT
ENT
FEED
PRINT
ENT
ENT
FEED
PRINT
ENT
FEED
PRINT
ENT
Display Operation keys Description
Time Setting Year Month, Day