Ohkura RM10C Instruction Manual Download Page 38

Page: 38 / 119

―

HXPRM10mnC0001E

6.4.3 Engineering List Print

Engineering list print provides the following setting data of the instrument on the chart paper.

Analog recording

Digital printing

Burnout/RJC etc.

(1) Engineering list print operating procedure

①

Press the

“

”

key.

②

Use the

“

”

key to display “

”, and press the

“

ENT

”

key.

③

Use the

“

”

key to select “

”. Pressing the

“

ENT

”

key executes engineering

list print.

Once engineering list print starts, the display is automatically returned to the Data Display screen.

Upon termination of engineering list print, it is returned to it was prior to starting engineering list print.

[Note]

①

Analog recording is interrupted while engineering list print is running.

However, measurement/alarm detection remains effective.

②

If an alarm is activated while engineering list print is running, alarm print will be performed when

recording restarts.

Summary of Contents for RM10C























































































































Search results

Summary of Contents for RM10C

Reviews:

Brands by name

Popular brands

Ohkura RM10C, Instruction Manual

Search results

Summary of Contents for RM10C

Reviews:

Brands by name

Popular brands