OHAUS TD32PE, Instruction Manual

Page: 33 / 40

EN-31 3 000 Series Indicators
7 MAINTENANCE
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING .
7.1 Cleaning
• The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
• Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or control panel.
7.2 Troubleshooting
Error Code Description Cause
Error 8.1 Power On Error Weight reading exceeds Power On Zero limit.
Error 8.2 Power On Error Weight reading below Power On Zero limit.
Error 8.3 Over Range Error Weight reading exceeds Overload limit.
Error 8.4 Under Range Error Weight reading below Underload limit.
Error 8.5 Tare out of range Error Tared at one unit but after switching to
another unit the tare value exceed the max.
Error 8.6 Display Overflow Weight exceeds 6 digits. Happened in the
cases of Accumulation or counting PCS
display
------- Busy message Displayed during tare setting, zero setting,
printing
--NO-- Action not allowed message Function not executed.
Battery icon flashing Low Battery error Battery is empty
CAL E Calibration Error Calibration value outside allowable limits
Lo.rEF Low reference weight warning message Average Piece Weight too small. (Warning)
rEF.Err Unacceptable reference weight message Reference Weight too small. The weight
on the pan is too small to define a valid
reference weight.
TABLE 7-1. TROUBLESHOOTING.
7.3 Service Information
If the troubleshooting section does not resolve your problem, contact an authorized Ohaus Service Agent. For Service assistance
in the United States, call toll-free 1-800-526-0659 between 8:00 AM and 5:00 PM Eastern Standard Time. An Ohaus Product
Service Specialist will be available to assist you. Outside the USA, please visit our website www.ohaus.com to locate the Ohaus
office nearest you.
8. TECHNICAL DATA
8.1 Specifications
Materials
Housing: ABS plastic
Keypad: polyester
Display Window: Polycarbonate