OHAUS Ranger 7000 R71MHD15, Service Manual

Page: 92 / 94

Ranger 7000
®
Series Service Manual 90 Ohaus Corporation www.ohaus.com
5. After making the selections enter the path to the file to download, or click the Browse button to
locate the file.
6. Click on the Start Download button.
7. When prompted, disconnect the power from the back of the scale, then re-connect.
8. The software will indicate the download process. When complete, disconnect the power from
the back of the scale, then re-connect.
9. Perform Service Calibrations (see Chapter 6). Test the scale.
B.8 Diagnostics
1. Connect the scale to your computer.
2. Start the OHAUS Software Service Tool.
3. Click on the tab labeled “Diagnostics.”
Figure B-12. Diagnostics Tab.
4. To test communications, click the Print button, or enter an RS232 Command String (from
Table 1-6) and USB Input (1-7) and click the Send button. The scale will response will be
shown in the box on the right.
Raise
Lower