OHAUS Ranger 7000 R71MHD15, Service Manual

Page: 83 / 94

Ohaus Corporation www.ohaus.com 81 Ranger 7000
®
Series Service Manual
APPENDIX B.
SOFTWARE SERVICE & REPAIR TOOL INSTRUCTIONS
Note: Make sure OHAUS Service & Repair Tools is version V2.1.1.1 or later which is available
for down load in DMX under 'Service Software' folder.
B.1
Software Installation and Software Selection:
The OHAUS Software Service & Repair Tool is used for 5 purposes:
1. To restore EEPROM data, if there is any possible data corruption.
2. To install a new Load Cell.
3. To install a new Main Printed Circuit Board (PCB).
4. To update the software in the scale.
5. For diagnostics.
Install the software on a Personal Computer running Microsoft Windows NT 4.0 or later, or Microsoft
Windows 98 or later. Insert the CD and run Setup.exe.
After installation, run the program Service & Repair Tools. The program has 2 selections, select
'Repair Tools' when performing scale repair and click 'Next'.
Figure B-1. Software Selection