(1
3;6HULHV%DODQFH
3.
Press the
)XQFWLRQ0RGH
button to get the density of the
sample. After completion of the test, press the
)XQFWLRQ
0RGH
button to test a new sample.
0HDVXULQJWKH'HQVLW\RIDIORDWLQJ6ROLG8VLQJ:DWHU
1.
Press and hold the
)XQFWLRQ0RGH
button until
Density
appears. Press
<HV
to enter the
Density Determination
.
2.
In determining density with the balance, the balance
setup and density determination procedures are basically
the same for a floating solid and a non-floating solid
except for the necessary holder (as shown in the figure)
to be used for density determination.
3.
After completion of the test, press the
)XQFWLRQ 0RGH
button to test a new sample.
1RWH
Lower the sample down into the liquid until it is fully
submerged.
Holder for non-floating
solids
Holder for floating
solids
0HDVXULQJWKH'HQVLW\RID6ROLG8VLQJDQ$X[LOLDU\/LTXLGRWKHUWKDQ:DWHU
1.
Press and hold the
)XQFWLRQ0RGH
button until
Density
appears. Press
<HV
to enter the
Density Determination
.
www.
GlobalScientificSupply
.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
