Courier 7000
EN-13
Printing Totalization Result and Format
1. Refer to the steps below, you can enable the Table on (
tABLE
) option in the menu.
a) Long press the
Menu
button until you see
mM.E.N.U
.
b) Release the
Menu
button and
C.A.L
. appears on the display.
c) Short press the
No
button several times until
mM.O.d.E
appears on the display.
d) Press the
Yes
button to enter the sub menu
e) Short press the
No
button several times until
tABLE
appears on the display, then press the
Yes
button to enter the table setting options.
f) Short press the
No
button until
ON
on the screen.
g) Press the
Yes
button to confirm. And
END
appears on the display.
h) Press the
Exit
button to exit.
2. The Table option is enabled.
•
In automatic totalization mode, the scale will automatically totalize the current weight when it performs
totalization successfully.
•
In manual totalization mode, you can press the
Function
button to totalize the current weight and
print it accordingly.
3. The output for current weight will appear as the example below.
Example:
4. When the totalization is finished, you can print the totalization result by below two steps.
1. Remove the load from the scale.
2. Press the
Function
button, and the totalization result appears on the display.
3. Press the
button to print the result.
Refer to the example below, you will see the output of the totalization result.
Example:
NOTE
: The scale supports 32 characters, the first line is “-”. The colon is left aligned, and the Weights/Numbers
are right aligned.
3.5.3 Dynamic Weighing
This application is used to weigh an unstable load, such as a moving animal. Three different start/reset
operation types can be selected:
Off (
OFF
)
= Disable the mode.
Manual (
mMAN
)
= Averaging and resetting are initiated manually by pressing the
FUNCTION
key.
Semi-Automatic (
SEmMI
) = Averaging is automatically initiated when the load weight is bigger than the start
weight; resetting is initiated by pressing the
FUNCTION
key.
Automatic (
AUtO
)
= Averaging is automatically initiated when the load weight is bigger than the start
weight; resetting is automatically initiated when the weight on the display is less
than 5d.
Display Hold
When the time is set to 0, the instrument will hold the displayed weight value on the display if that weight is
greater than 5 divisions.
NOTE
: The minimum start weight is 5 divisions. If the scale does not operate, please check if the load is
greater than 5 divisions.
-------------------------
n: 5
Total: 100.000 g
Avg: 200.000 g
Min: 10.500 g
Max: 88.200 g
Diff: 78.300 g
1. 1000 g N
2. 2000 g N
3. 3000 g N
4. 1999 g N
5. 1000 g N
-------------------------
Summary of Contents for Courier 7000
Page 1: ...Courier 7000 Instruction Manual...
Page 2: ......
Page 4: ......
Page 61: ...Courier 7000 EN 57 11 5 Column Kit Installation 1 2 3 4 5 6...
