OHAUS C51XE100L, Instruction Manual

Page: 18 / 40

EN-12 CATAPULT 5000 SERIES SCALES
3.3.4 Geographical Adjustment Factor
The Geographical Adjustment Factor (GEO) is used to compensate for variations in
gravity.
Attention:
Changing the GEO Factor alters the calibration. The GEO value was set at
the factory and should only be changed by an authorized manufacturer’s representative
or certified verification personnel.
Refer to table 3-2 to determine the GEO factor that corresponds to your location.
3.3.5
End Calibration
Advance to the next menu.