12
11/13
Set
ting up
WARNING
Risk of explosion when the battery switch is not set correctly.
f
Make sure that the battery switch is in the right position for the
desired type of battery.
5. Turn over the scale.
6. Place the batteries in the compartment so that the positive poles
face the springs, see pole markings on cover and housing.
7. Close the battery compartment and put the weighing pan back on.
2.5
Connecting to mains power
The power supply is stored in a compartment under the scale to support
save transport.
1. Connect the supplied power supply unit to the power connection
socket on the underside of the scale.
2. Plug the power supply unit into a correctly grounded power outlet.
2.6
Turning scale on/off
f
To turn the scale on press the
On/Off
key.
f
To turn the scale off press and hold the
On/Off
key until a long beep
can be heard.
•
After the scale is turned on, it runs through a short display test. All
segments and status messages briefly light up, the software version
is displayed.
•
The scale is ready when the weight display appears.
2.7
Cleaning
WARNING
f
Disconnect the AC adapter from the AC power supply and the
balance before cleaning.
f
Do not allow liquids to enter the AC adapter or the balance.
If cleaning is required, use a soft cloth dampened with water and a
mild detergent.
Attention
Do not use harsh chemicals to clean the balance, as the finish may
be damaged.
Cleaning
OHAUS
Operator Manual Aviator 7000
Order number 72246392C
