28
11/13
Operator setup
4
Operator setup
4.1
Setup operation
4.1.1
Entering operator setup
1. Press and hold the
Menu
(PLU) key until a long beep can be heard.
SET 1 OP is displayed for "Operator Setup"
2. Press the
Enter
(On/Off) key to enter operator configuration.
The first operator setup step and its current setting are displayed.
4.1.2
Navigation in the setup
Selecting setup step
f
To move to another setup step, use the
Arrow down
(Tare) key or
Arrow up
(Zero) key.
In the line below, the current setting of the step is displayed.
Changing settings
f
To toggle between the settings of a setup step, use the
Enter
(On/Off) key.
When moving to another setup step, the selected setting is con-
firmed.
4.1.3
Ending setup
1. Press the
Menu
(PLU) key to leave operator setup steps.
2. Press the
Menu
(PLU) key again to leave the setup mode.
SAVE is displayed.
3. If you do not want to save, use the
Enter
(On/Off) key to toggle
between SAVE and ABORT.
4. Press the
Menu
(PLU) key a third time to return to the weighing
mode.
(press and hold)
seT 1
op
sTep 01
off
sTep 01
sTep 02
sTep 05
sTep 04
on
off
on
0
1
2
3
seT 1
op
save
save
abort
0.000
kg
OHAUS
Operator Manual Aviator 7000
Order number 72246392C
