54
MENUS
Parity
Parity can be set to Odd, Even or None. The default setting is None. To set parity, proceed
as follows:
1. Access the
submenu.
2.
ON
TARE
.
3.
MODE
,
,
.
4.
ON
TARE
.
Stop Bits
The number of stop bits can be set to 1 or 2. The default setting is 2. To set stop bits, proceed
as follows:
1. Access the
submenu.
2.
ON
TARE
.
3.
MODE
or
.
4.
ON
TARE
.
Good Laboratory Practice (GLP)
This submenu enables the storage of an identification number and/or a project number.
When entered into the balance, the identification number and project number are available
when printing. The reason the entries are made under the Print submenu, is that when legal
for trade operation (LFT) is enabled, the Setup submenu is locked out, leaving the Print
submenu free to make entries.
1. Access the
submenu.
2.
ON
TARE
.
3.
ON
TARE
first digit is flashing.
4.
MODE
changes the value of the first digit.
paR ITy
NONe
NONe
-e-
-oDD-
paR ITy
sTop
2 sTop
2 sTop
1 sTop
sTop
9lp
iD NO
0000000
Menu
Menu
