21
OPERATION
NOT DISPLAYED
5g
4g
2g
20g
40g
ORDER SAMPLES TAKEN IN
5. To use the High Point function again, repeat steps 1 through 4.
6.
MODE
to exit High Point and return to a weighing mode.
High Point (Cont.)
4.
ON
TARE
To view the lowest and highest sample weight. The display LIMIT flashes,
the lowest sample weight is displayed followed by two short beeps, the display then
indicates the highest sample weight for a few seconds then automatically changes
back to the normal weighing mode.
6/22/95
1:00:30 PM
Printing Data
Printing data to an external computer or printer requires that the communications param-
eters in the Print menu be set first. Refer to page 51 Print menu. A wide variety of printing
options are available, refer to page 55, Print Options under the Print menu and set the desired
options before proceeding. To print data,
.
This section defines the various printing setups with printing samples.
Time and Date
When time and date are entered in the
balance through the Setup menu and with
both Time and Date options set to ON
under the Print Options submenu, each
printout starts with the time and date on
the first line.
0.00000
s
g
Menu
Menu
