EN-18
ADVENTURER BALANCES
Step 2 of 2 –
Weigh the
Sample
Submerged in
the Liquid.
Follow the
screen
instructions,
then press
Accept
to store the
sample weight
(submerged
in liquid).
Once the necessary weights have been determined, the density of the sample is displayed in
g/cm
3
(along with the weight in air, weight in water) on the Application screen.
Press
Start
to reset all the weight values and restart the process.
4.5.2 Measuring the Density of a Buoyant Material Using Water
Press the
Item Settings
button to open
Settings
screen.
Confirm the following
Setups
are selected:
Density Type:
Solid
Liquid Type:
Water
Porous Material:
Off
Press
Back
to return to the Density Determination home
screen.
Follow the same procedure as Solid Material above, except
in Density Determination step 2,
push the sample
down
into the liquid until it is fully submerged.
4.5.3 Measuring the Density of a Solid Using an Auxiliary Liquid
To enable this feature, enter the Density Determination Setup menu and select the following:
Density Type: Solid; Liquid Type: Other; Porous Material: Off
.
Confirm the default values displayed (Liquid Density, etc) are
correct.
To adjust the Liquid Density value, touch the
Auxiliary liquid
button and select Other.
A numeric input window appears.
Key in the density in g/cm
3
, then press
Save
.
The display returns to the previous screen.
To return to the Density Determination home screen,
touch
Back
.
Begin the Density determination process as per above.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
