EN-36
Analyzer and Bench Meter
Note
:
When printing out dual channel measurement result, conductivity results will be
printed after pH results and they will be shown in the same line.
In continuous mode, "Continuous" will be used for Sample ID.
9.2
Output format
When printed through a printer, the rows of the printing result will be separated and
shown as follows:
The first row: the above item number 1, 2, and 3
The second row: the above item number 4, 5, 6 and 7
The third row: the above item number 8, 9, 10, 11 and 12
The fourth row: the above item number 13, 14 and 15
The fifth row: the above item number 16, 17, 18 and 19
The sixth row: the above item number 20 and 21
10. Commands
Commands listed in the following table will be acknowledged by the meter/analyzer.
Table 10-1 Commands
Command Characters
Parameter
Function
SP
/
Print when measurement is stable
LP
LP 0
Print calibration result
LP 1
Print measurement result
PV
/
Print version number
PSN
/
Print SN number
ON
/
Turn on the meter/analyzer
OFF
/
Turn off the meter/analyzer
Summary of Contents for a-AB33EC
