OHAUS a-AB33EC, Instruction Manual

Page: 33 / 152

Analyzer and Bench Meter EN-31
7 EVEN = 7 data bits, even parity
7 ODD = 7 data bits, odd parity
7 NONE = 7 data bits, no parity
8 NONE
= 8 data bits, no parity
Stop bit
Set the number of stop bits.
1 bit
= 1 stop bits
2 bit = 2 stop bits
Handshake
Set the flow control method.
None
= no handshaking
Xon/Xoff = XON/XOFF software handshaking
Date/Time
Time format
Set the time format.
12H Clock = 12 hours
24H Clock
= 24 hours
Date Format
Set the date format.
MM/DD/YY
= Month/Date/Year
DD/MM/YY = Date/Month/Year
YY/MM/DD = Year/Month/Date
Adjustment
Enter this menu to adjust data and time.
1. Touch the
Menu
icon to enter menu option.
2. Touch
i-Steward
, and then touch
Adjustment
.
3. The first two digits of date on the upper left corner of the screen starts to blink.
4. Press the
or button to adjust the date. Touch
Next
on the screen when
you finish to adjust the next digits of date and time.
5. Then touch
Next
again until all the digits have been adjusted, and the
meter/analyzer returns to the main menu.
Brightness
Enter this menu to Increase or decrease the display brightness under different lighting
conditions.
High = high brightness
Medium
= medium brightness
Low = low brightness
Keypad Beep
Enter this menu to enable or disable the beep sound when pressing buttons.
ON = enabled beep sound
OFF
= disabled beep sound