1. Pull up the handlebar stem safety locking mechanism (29), located on the handlebar stem (22), to unfold it
back to its riding position (See the photo on page 13).
2. Next push the safety button on the metal folding handle (17) on the frame and pull the handle to unfold the
frame so that it locks into place.
3. Open the seat post quick release lever (3) to raise the saddle to its original height. Once raised, re-tighten
the quick release (3) so the seat post (2) stays in place. If it needs to be more firmly secured, open the quick
release lever, tighten nut on opposite side of lever, then re-close lever. Test to confirm that it’s secure before
hopping onto the saddle.
4. Pull the pedals (13) back into riding position. You will hear a click when they are securely in place.
WARNING
: Do not raise the seatpost (2) above the “minimum insert” line clearly printed on the backside
of the seatpost (2). Raising the seatpost (2) above the minimum insert line can cause the seatpost to fail,
which could in turn result in loss of control of your VOLT and could cause you serious injury.
25
UNFOLDING YOUR VOLT
