Installation & Operation Manual Merlin 1000V
Rev: 02 05-22
12
Installation Details
Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all OGS gas detection equipment be commissioned by competent/trained engineers to ensure correct installation
and operation. The Merlin range of gas detectors are calibrated when manufactured, however, we strongly recommend the
detectors response and alarm signals are tested and validated once installed. This will ensure the equipment performs as intended
and is free from any unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, OGS can assume no responsibility for any errors
or omissions in this document or their consequences. OGS would greatly appreciate being informed of any errors or
omissions that may be found in the content of this document. For information not covered in this document, or if there is a
requirement to send comments/corrections, please contact OGS using the contact details.
www.
oceaniagassafety
.com
Oceania Gas Safety
Tuakau Waikato
New Zealand
+64212386990
Oceania Gas Safety is the owner of this document and reserves all rights of modification without prior notice.
