37
•
Repeat as often as necessary (20 tracks maximum). Then press
to start playback. Do this in the
order you have defined. Use the
and
buttons to browse through your programming.
•
Press the
button twice to cancel programming.
listening to FM radio
1.
Connect the antenna cable provided to the back of the micro hi-fi system, and fully unfold it.
2.
Turn on the micro hi-fi system and select the FM source by repeatedly pressing the
BASS
TREBLE
button on
the micro hi-fi system or the remote control.
Performing a full scan of the FM band
1.
When the unit is turned on, press and hold the
SCAN
button on the remote control or the button
on the micro hi-fi system for 3 seconds to fully scan the FM band. The first thirty stations found are
stored.
2.
To interrupt the search, press the
SCAN
button again.
Automatically searching for a radio station
1.
Hold down the
or
button for 2 seconds to perform an automatic scan.
2.
Scanning of the FM band stops when a radio station is found.
3.
You can then briefly press the
or
button on the remote control to refine your search,
as described in the next section.
Manually searching for a radio station
1.
Briefly press the
or
button on the remote control until you obtain an optimal reception
frequency.
2.
Each time the
or
button is pressed, the frequency decreases/increases by 0.05
MHz.
3.
If reception is poor, adjust the FM antenna or change the frequency.
Automatically storing radio stations
1.
When the micro hi-fi system is turned on, select the FM station of your choice.
2.
Press and hold the
PROG
button. Memory number 01 flashes on the display. Use the
or
button to select the desired memory number. Press
to confirm the programming of the
FM station.
MEMORISED
appears on the display.
3.
Repeat as often as necessary.
Summary of Contents for MS-O-400-D
Page 1: ...MICRO CHA NE MICRO HI FI SYSTEM MICROKETEN MS O 400 D MIKRO STEREOANLAGE MICROCADENA...
Page 118: ......
Page 119: ......
