User’s Manual Wireless Module
Page 2 of 22
but should not be distributed to the end user:
1.
This module is intended for OEM integrators only.
2.
Please refer to the full Grant of Equipment document for other restrictions.
3.
This module must be operated and used with a locally approved access point.
USER’S MANUAL OF THE END PRODUCT:
In the user’s manual of the end product, the following information in a prominent location must include:
1.
To comply with FCC RF radiation exposure requirements, the antenna(s) used for this module must not be
co-located or operating in conjunction with any other antenna or transmitter.
2.
The end user has to be informed: 1). to keep at least 20 cm separation with the antenna while this end
product is installed and operated. 2). the FCC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. 3). any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate this equipment.
3.
If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19. statement is required
to be available in the user’s manual: this device complies with part 15 of FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
4.
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate this equipment.
