Ogawa estiloPRIME+ OZ 0978, User Manual

Page: 6 / 15

Product Operation Guide Product Operation Guide
9 8
CAUTION
Do not lean on the dual massage mechanism in the cushion when
adjusting your body position to avoid tears on the products cushion surface.
Do not jam or force any part of your body against the moving massage
mechanism.
Not recommended for use on wooden surfaces as the zipper may damage
the wood.
Only gentle force should be exerted against the unit in order to eliminate
any risk of injury.
Do not attempt to repair the massage cushion, please contact ‘OGAWA
Service Center’ for any servicing required.
●
●
●
●
●
●
7. [Level selection for tapping strength]
During the kneading & tapping auto program, press this button to
switch the tapping strength among three levels (low/medium/high).
The indicator light will flash slowly for low level, flash fast for medium
level, shine steadily for high level.
●
8. [Spot]
During the kneading & tapping auto program, press this button to stop
the massage rollers from moving upward or downward, thus concentrate
the kneading & tapping on current spot.
●
9. [Massage zone selection]: [Full]/[Upper]/[Lower]
When [Power] is on, Three massage zones can be selected:
[Full]/[Upper]/[Lower]. The massage rollers will move up and down and
massage in the selected zone.
●
6. [Back kneading & tapping mode selection]
When [Power] is on, press this button to start the auto program of back
kneading & tapping and switch among below three modes in sequence.
1. ktapping (intermittent continuous tapping)
--the indicator light will flash slowly.
2. ktapping (continuous tapping)
--the indicator light will flash fast.
3. ktapping (intermittent tapping)
--the indicator light will shine steadily.
10. [Heat]
When the massage mechanism is functioning, press this button to start
the heat function. L.E.D. lights on the massage rollers will illuminate.
Press the button again, the heat function stops, L.E.D. lights on the
massage rollers turn off.
11. [Vibration]
When [Power] is on, press this button to turn on the seat vibration and
switch among three intensity levels (low/medium/high). The indicator
light of the selected level will illuminate.