Ogawa estiloPRIME+ OZ 0978, User Manual

Page: 5 / 15

Product Operation Guide Product Operation Guide
7 6
Controller operation instruction
When [Power] is turned on, press and hold the [Upward]/[Downward]
button to move the neck massage rollers upward or downward to adjust
the neck massage position. Release the button when the desired position
is achieved.
Preparation before use
Placing the massager
The massager is equipped with back strap that allow user to fasten onto
most chairs.
Place the massager on a chair, wrap the two ends of the strap round the
back of the chair and secure with Velcro.
●
●
back strap
Velcro
1. [Power]
Insert the power plug into the electric outlet. If the rollers are not at the
bottom position, the indicator light of the [Power] button will flash and the
rollers will return to the bottom position.
Press the [Power] button, the product enters the standby mode, and the
[Power] indicator light is on. Then you can select the massage program
you want and enjoy the massage. There is a 15-minute auto shut off for
each usage. When the 15-minute time is over or if you press the [Power]
button during operation, the unit will stop functioning, all the lights on the
panel will turn off and the massager rollers will return to the original
position.
●
●
●
2. [Clockwise/anti-clockwise neck massage]
Function available when [Power] is turned on. Press this button and the
rollers will start a clockwise kneading on the neck. Press the button
again and the rollers will knead anti-clockwise.
●
3. [Alternate direction neck massage]
Function available when [Power] is turned on. Press this button and the
rollers will start kneading on the neck. The direction will alternately
switch between clockwise and anti-clockwise.
●
4/5. [Upward] / [Downward]