Error Code
Computer show “Err 2” while turn power on
Switch power on and press
INCLINE Up
+
INCLINE DOWN
+
STOP/ENTER
button
and hold them, then pull on emergency stop switch, computer show “
1
” blinking, use
INCLINE UP
and
INCLINE DOWN
to select computer show “
2
” blinking, then press
START
button to enter the Incline Calibration Procedure.
Incline Level display shows “
0
”. Press Incline up and Down button to adjust the deck to
horizontal position then press STOP/ENTER button to confirm the 0 level.
After set the 0 level, Incline Level display show “
12
” and the treadmill will automatically
incline up. Waiting for treadmill incline stop, press Incline up and Down button to adjust
incline level 12 correct position , then press STOP/ENTER twice to confirm the level
12 position and return computer power on status.
Computer show “ “ oil can or “Ser” for reset
Computer can display service maintain used mileage for service technical engineer
check, this maintain mileage for cycle every
300km(186ml)
to remind unit owner to
maintain treadmill on regular time. when showing maintain mileage can press SPEED
DOWN button to reset.
Switch power on and press SPEED UP and DOWN button and hold them then insert
safety key. Press INCLINE UP and DOWN button to select computer display show “
3
”,
blinking then press START button, computer will display maintain mileage, press
SPEED DOWN button can reset maintain mileage, then press ENTER button twice
return to power on status.
