User Manual
10
S P I N P R O B 2 . 1
Product Installation
Step 4:
1. Firstly, remove the front and rear console cover (32L/R) and the Ball bolt (29) out of the
handlebar post (25) respectively.
Then, thread the pulse wire (36) through the hole of handlebar post (35) and pull it out from
the hole of the console bracket.
2. Pre-install the handlebar (35) on the handlebar post (25) chuck. Insert the Ball bolt (29) by
getting the ball bolt (29) through the front console cover (32L) and the flat washer (31) in
sequence.
Activo Spin Pro B2.1 EN.indd 10
Activo Spin Pro B2.1 EN.indd 10
8/6/2014 8:47:24 AM
8/6/2014 8:47:24 AM
