PART # 1609139
END LEG WITH EXTENSIONS
INSTALLATION INSTRUCTIONS
ELEVEN WOOD
1. Begin by dropping the threaded cross dowel into the hole on top of the extension, making sure
the slotted end is facing up. Then insert the threaded rod into the clearance hole on front of the
extension and fasten it halfway into the cross dowel as shown in the view above.
2. Next, attach the extensions to the legs making sure the holes in the leg align with the dowel
pins in the extension and that the threaded rod in the extension can be inserted into the
clearance hole on the leg.
3. Attach the legs to the frame rails, once again making sure all the corresponding holes
align with one another. Locate the “D” shape pockets inside the frame rails and attach the
rectangular washer, followed by the flange nut. Tighten the nut using a 1/2" wrench.
4. The frame is now fully assembled and can be mounted to the worksurface. Verify the frame is
centered completely and fasten it to the worksurface using the supplied screws.
NOTE: If your table has intermediate legs, they should be assembled
prior to installing the end legs.
CROSS DOWEL
EXTENSION
THREADED ROD
FRAME RAIL
DOWEL PIN
