PART # 1609141
CORNER LEGS
INSTALLATION INSTRUCTIONS
ELEVEN WOOD
1. Begin by removing the hex nuts and flat washers from the threaded studs
on each of the table legs. Attach the leg to the frame assembly by inserting
the threaded studs into the corresponding holes in the frame as shown in
the view above.
2. Next, re-attach the flat washer and hand tighten the hex nut onto the
threaded stud. Repeat the previous steps for the remaining table legs. To
complete the assembly, fully tighten all the hex nuts using a 1/2" wrench.
NOTE: Views shown without the
worksurface for clarity purposes.
THREADED STUD
HEX NUT
FLAT WASHER
FRAME
