Issue2
November 14, 2011
- 4 -
Figure 3: Front View of Cabinet
The front section houses fiber optic equipment and is provided with 23” wide rack space.
The rear section is used for cable ingress and egress.
Cable entry and exit from the cabinet passes through the split seals located in the bottom
rear section of the equipment bay. Removable panels are provided at the base of the
cabinet, which allow the cabinet to be slid over the input and output cables without
threading the cables through the cabinet. Split seals can be slid over the cables without
threading the cables through the seals.
The master grounding bar is located in the rear section of the equipment bay. See the
cabinet grounding sections of this document for grounding instructions.