OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
8
Manual
Control
The Gamma Ray Logger can also be used to take manual measurements of
a single core sample.
1. Select “DigiBASE Manual Control” from the “Options” menu.
2. Place the core under the shield.
3. Click the “Start” button.
DigiBASE Info:
This information comes from the DigiBASE scanner within
the Gamma Ray Logger. This information is for debugging purposes only.
DigiBASE Realtime:
This information shows the current runtime parameters
for the DigiBASE scanner. This information is for debugging purposes only.
True Time:
The scanner accumulates data over a specified period of time.
At the end of this interval, the data is recorded as a single data point and the
process starts over. This is called True Time. To set the True Time, enter a
value in this field and click the “Set True Time” button.
High Voltage Setting:
This is the amount of voltage being sent to the photo
multiplier.
Gain Fine:
The amplifier gain.
Get Versions:
Populates the “DigiBASE Info” box
