OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
4
Parts and
Accessories
Caps
#175-13 Outer Cap for Pressurized Aging Cells, 303 Stainless Steel
For tests below 400°F:
#175-18 Inner Cap for Pressurized Aging Cells, 303 Stainless Steel
#175-18-1 Inner Cap for Pressurized Aging Cells, 316 Stainless Steel
For tests above 400°F:
#175-00-3 Inner Cap, Accepts Rupture Disk, 316 Stainless Steel
#175-56 Rupture Disk, ¼", 2,000 psi
#175-57 Rupture Disk, ¼", 1,500 psi
For tests above 400°F, always use an inner cap with a rupture disk.
O-rings and Gaskets
For tests below 200°F:
#175-54
Buna N O-ring for Outside of Aging Cell
For tests up to 400°F:
#170-17 Viton
®
O-ring for Valve Stem
#175-09-2 Viton
®
O-ring for Inside of Aging Cell Body
#175-47 Viton
®
O-ring for Outside of Aging Cell
#175-62 Viton
®
O-ring for Teflon
®
Liner Plug
#175-63 Viton
®
O-ring for Teflon
®
Liner Lid (Piston)
For tests above 400°F:
#175-09-1 Teflon
®
O-ring for Inside of Aging Cell Body
#175-46
Teflon
®
O-ring for Outside of Aging Cell
#175-03
Peek O-ring for Inside of Aging Cell Body
Buna N O-rings should only be used for temperatures below 200°F.
Viton
®
O-rings can be used at temperatures up to 400°F.
Teflon
®
O-rings should be used for temperatures above 400°F.
Set Screws and Wrenches
#175-14 Set Screw for Pressurized Aging Cells, ⅜"
#175-15 Wrench for ⅜" Set Screw
#175-60
Teflon
®
Liner, for 500 mL Aging Cells with T-screw
#175-60-1 Liner
#175-60-2 Piston
#175-60-3 Plug
#175-60-4 T-screw
#175-62 Viton
®
O-ring for Teflon
®
Liner Plug
#175-63 Viton
®
O-ring for Teflon
®
Liner Piston
