OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
20
Operation
Filling the Slurry Cup
1. With the slurry cup disassembled, examine the threads on the inside of
the cylinder. The end with the larger set of threads is the top.
2. Coat the surface of the paddle and the inside of the slurry cup with a high-
temperature grease to facilitate cement removal.
3. Insert the paddle assembly all the way into
the top of the cylinder.
Cylinder
Paddle
Bottom Cell Cap
Locking Ring
Gasket
4. Slide the slurry cup lock ring on top of the paddle assembly with the two
notches facing upward. Tighten the locking ring completely using the
provided slurry cup tool.
5.
Prepare the cement slurry as stated in API Specification 10.
6. Pour the cement into the slurry cup through the open bottom of the
cylinder.
7. Place the gasket around the threads of the bottom cap. Apply high-
temperature grease to the gasket and cap surface. Screw the cap onto
the cup and tighten with the slurry cup tool.
