ofinto TA-ELE-01, User Manual

Page: 27 / 56

E
TROUBLESHOOTING
ERRORCODES
Code Meaning Signal Solution
E00 Initialization
not complete Initialize the device
E01 Overheating
protection 3 beeps Activates automatically after
>300 seconds of use of the
system. The system can be used
again after 75 seconds.
E02 Imbalance of
>10mm 2 beeps Initialize the device
E03,
E04 Collision The table moves back 40mm
and can then be used again.
Remove the obstacle
In case of recurring error mes-
sages:
• Make sure that the power
unit
F
is screwed on tightly
and that it cannot move.
• Make sure that the table is on
level ground.
E11,
E12 Overload 5 beeps Remove load from the table top.
E31,
E32 Connection
issues 4 beeps Check the cable connection
between the table legs and the
power unit.
27