a) Determine the correct comb size.
Use the table below to determine the correct comb size for the book
thickness. You can insert more sheets into the comb, but it may affect the
appearance of your book. Covers are not included with the number of sheets
column.
Comb Diameter Book Thickness Number of sheets
Inch
mm Inch
20lb 80gsm
3/16 4.8 1/8
30
1/4
6.4 3/16
4.a 45
5/16
7.9 1/4
6.4 6.5
3/8
9.5 5/16
7.9 80
7/16 11.1 3/8
9.5 95
1/2
12.7 7/16
11.1 110
9/16
14.3 1/2
12.7 125
5/8
15.9 9/16
14.3 140
3/4
19 5 / 8
15.9 160
7 / 8
22.2 3/4 19
190
1
25.4 7/8
22.2 220
1-1/8 28.6
1 25.4 250
1-1/4
31.8 1-3/32
27.8 275
1-1/2
38.1 1-3/16
30.1 300
1-3/4
44.5 1-7/16
36.5 360
2 50.8 1-11/16
42.8 425
b) Placing the comb onto the rake.
Place the comb onto the rake with the fingers of the comb facing the front of
the machine. The solid section of the comb will be facing the rear of the
machine. Make sure the points of the fingers are facing up.
c) Setting the comb opener stop
The comb opener stop knob (4) is located on the rear of the comb opener.
Set the comb opener stop by turning the knob counter clockwise so the comb
opens far enough to place a book on the fingers of the comb, but not to far so
the comb is lying flat with no room for the book.
Summary of Contents for RHIN-O-TUFF OD 3500
