TBB2020/TBB4020 END/COFFEE TABLE
ASSEMBLY INSTRUCTIONS
© Office Star Products December 2006
PART
QTY
1.
Table Top . . . . . . . . . . . . . . . . 1
2.
Leg . . . . . . . . . . . . . . . . . . . . . . 4
3.
Screw . . . . . . . . . . . . . . . . . . . . 8
4.
Washer . . . . . . . . . . . . . . . . . . 8
5.
Allen Wrench (not shown) . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Place Table Top (1) face down on a soft surface, attach Legs (2) using two Washers (4) and two Screws (3) for each leg
AS SHOWN IN DETAIL A.
DO NOT FULLY TIGHTEN SCREWS.
STEP 2
Carefully turn table to the upright position, apply downward pressure to level and align table,
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (5).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING TABLE.
IMPORTANT NOTE:
1 . Use Hand tools only for assembly as
power tools may cause damage .
2 . Carefully remove any staples used
for packaging .
STEP 1
DETAIL A
1
2
4
2
2
2
2
1
3
