© Office Star Products January 2013
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Before you begin, please remove pre-attached plastic caps from pre-installed threaded bolts on Frame (3). Attach Top Panel (1) to Frame (3) and
secure using two Small Screws (6),
FULLY TIGHTEN ALL SMALL SCREWS (6) USING ALLEN WRENCH (11).
STEP 2
Secure both Casters (4) to rear of Base (2), and both Casters w/ Brakes (5) to front of Base (2),
FULLY TIGHTEN ALL CASTERS
USING KEY WRENCH (12).
STEP 3
Secure Frame (3) to Base (2) using four Flat Washers (8) and Four Nuts (9),
FULLY TIGHTEN ALL NUTS (9) USING
KEY WRENCH (12).
Secure Knob (10) to adjustment pad (pre-installed) using Medium Screw (7).
FULLY TIGHTEN MEDIUM SCREW (7).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING LAPTOP STAND
STEP 1
STEP 2
STEP 3
2
3
5
4
10
9
12
7
6
8
PART QTY
1.
Top Panel . . . . . . . . . . . . . . . . . . . 1
2.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
3.
Frame . . . . . . . . . . . . . . . . . . . . . . 1
4.
Caster . . . . . . . . . . . . . . . . . . . . . . 2
5.
Caster w/ Brake . . . . . . . . . . . . . . . 2
6.
Small Screw . . . . . . . . . . . . . . . . . . 2
7.
Medium Screw . . . . . . . . . . . . . . . . 1
8.
Flat Washer . . . . . . . . . . . . . . . . . . 4
9.
Nut . . . . . . . . . . . . . . . . . . . . . . . . . 4
10.
Knob . . . . . . . . . . . . . . . . . . . . . . 1
11.
Allen Wrench . . . . . . . . . . . . . . . . 1
12.
Key Wrench . . . . . . . . . . . . . . . . . 1
11
Adjustment Pad
Phillips Screwdriver also needed for assembly
(not provided)
2
12
4
5
1
PSN620 / PSN621 / PSN623 / PSN625 / PSN627 / PSN628
PRECISION LAPTOP STAND
ASSEMBLY INSTRUCTIONS
