Off Indel B CRUISE, Instructions For Use Manual

Page: 16 / 50

14 CRUISE_(DC)_IM_20221123
ASSEMBLY
The refrigerators of the Cruise range are pre-set for being assembled in a niche.
Fastening can be done on the front plate band.
It is very important for the refrigerating unit, consisting of the compressor and the condenser, to be well ventilated, with the
cool air coming in from the bottom and going out from the top. You must ensure proper ventilation of the refrigerating unit.
The air inlets and outlets must have a free cross section of at least 200 cm2. (see ventilation diagrams in FIG. 1-2).
The model CR.40 - CR.42 – refrigerators are provided with a refrigerating unit which can be separated from the set and
placed at a distance in order to make the best use of the available space (about 200 cm).
Take great care when handling the connection tube in order to prevent breakages (FIG. 3). The compressor must normally
stand in a vertical position, but it will work equally well slanted by up to 30°.
EASY FIX FIXING
Cruise models 42-49-65-85-130 can be fixed to the lodgings by means of the Easy Fix system.
This system involves four special pre-drilled points inside a trunk, for easy and effective installation that is not visible from
the outside (FIG. 8).
With Easy Fix, you can install Cruise units with the door flush to the furniture without using a special mounting flange. For this
installation, you must leave 10 mm of space between the refrigerator and the furniture unit at least for the entire thickness of
the door, thus ensuring its free movement.