12
Changing the fork shaft (different length):
•
remove the protection cap;
•
unscrew the “G” nut;
•
unscrew the “M” nut and the “L” washer;
•
replace the shaft;
•
insert the new shaft and fix the “G” and “M” nuts,
being careful to the correct positioning of the “L”
washer.
3.5
Front castor replacement
If necessary, the front castor can be replaced:
•
completely unscrew one of the “D” screws and
remove the “E” pin on the side of the non-removed
“D” screw, being careful to where the “F” spacers
are;
•
if necessary, change the wheel;
•
position the wheel hole at the same level of the
most suitable fork hole;
•
insert the “E” pin, being careful not to move the “F” spacers from their
original positioning;
•
fix the “D” screw.
Be sure to choose the same position for both castors. Asymmetrical combinations
produce instability.
Be careful not to change the front seat height while changing the front castors.
