Important notes
Ankle support
The Dynamics Plus ankle support
stabilises the ankle joint by means of its
compressive effect. Massaging silicone pads
help reduce swelling rapidly. For a pleasant
wearing feeling the extremely thin, highly
elastic Arthroflex
®
comfort zone is incorpor-
ated in the sensitive area of the talus.
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified experts.
– Wear the product directly on your skin. If it has to be
worn in combination with other products, then please
discuss this in advance with your doctor.
– During long periods of rest (e. g. when sleeping) the
product should be removed.
– If you experience an unpleasant sensation, intense
pain or any other problem when wearing the product,
then remove it and contact your doctor or specialist
supplier.
– We use a comprehensive quality management system
to check our products. However, should there still be
reason for complaint, please contact your specialist
supplier.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
Plus product.
Ofa Bamberg wishes you a speedy
recovery!
←
Fitting instructions
The fitting instructions in pictures can be found
on the fold-over page at the beginning of the
brochure.
1
The ankle support can be put on quickly and easily
using the enclosed fitting aid. This is done by slipping
your foot into the opening of the fitting aid.
2
Now pull the support over the foot with the longitud-
inal seam facing the rear. The support is sitting correctly
if the silicone pad is surrounding the ankle from below.
3
Finally, remove the fitting aid by pulling it out of the
support over the toes towards the front.
36_DYN_Knoechelbandage_plus_545105038_ble_20190410_7587.indd 8
08.05.2019 09:57:32
