8 | 9
english
Adjusting the lumbar support
(for specialist staff only)
The closure of your Dynamics Plus
Lumbar Support will be adjusted to
your individual needs by specially
trained staff.
[
→
see page 2]
A
The
product features a neutral angle
setting for right-handed wearers.
B
The two parts of the closure can
be detached from the support to ad-
just them to the shape of your body.
To put them back on, the adjusting
aid provided is placed between the
Velcro and the fleece. The desired
angle can now be set, the adjusting
aid removed and the Velcro pressed
closed.
C
to fit the closure for
left-handed wearers, the two parts
of the closure are detached from the
support and each is reattached to
the other side, as described in step B.
D
The product is positioned correctly
if both parts of the closure are fas-
tened together and set horizontally
flush on the stomach.
– Feelings of numbness and circulatory
problems in the area of application
– Problems with lymphatic drainage as
well as unexplained swelling
Material composition
57% Polyamide
18% Elastane
16% Polyurethane
9% Metal
Polypropylene
Acrylamide
Polyester
Venyl
Aluminum
Care
Delicate wash cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Do not use fabric softener!
Indications
– Acute and chronic pain in the lum-
bar and sacral regions of the spine
– Lumbago
– Degenerative changes to the lumbar
spine
Side effects
There are currently no known side
effects for any part of the body if this
product is used correctly. However, if
the product is too tight, this may cause
local pressure points or constrict blood
vessels and nerves.
Contraindications
In the following cases you should
consult your doctor before using the
product:
– Skin conditions or injuries in the
area of application, particularly
where signs of inflammation
such as redness, heating or
swelling are present
– The product should be washed
before its first use and then on a
regular basis.
– Remove the pad from the support
before washing. It can be cleaned
with a damp cloth.
– Close all Velcro closures and
wash the product separately in
a washing bag at not more than
30°C. Use mild-acting detergents
without plasticisers (such as
Ofa Clean special detergent) and
rinse the product out thoroughly.
The product can be spun gently,
but please do not wring it out.
– Mould the product into the right
shape and let it air-dry. Do not
dry the product in the dryer, on a
radiator/heater or in direct sun-
light, and never iron it.
– In order to maintain the quality
of your product, please do not
use any chemical cleaning prod-
ucts, bleaches, petrol or fabric
conditioners. Do not apply any
greasy or acidic products, oint-
ments or lotions to the skin in
the area of use. These substances
may damage the material.
– Store the product in a dry place
and protected from sunlight and
heat, preferably in the original
packaging. Please dispose of the
product according to local speci-
fications after the end of use.
Disposal
Please dispose of the product
according to local regulations after
the end of use.
Instructions for care
