Important notes
Bandage and relief shoes
The Dynamics bandage and relief
shoes
provide maximum mobility after
foot operations, injuries and for other
wound processes. Their open design
makes them easy to put on, and they can
be worn with or without the toe cap. The
specially shaped soles of the relief shoes
provide targeted pressure reduction in
the forefoot or heel area.
←
Fitting instructions
The fi tting instructions in pictures can be
found on the fold-over page at the beginning
of the brochure.
1
To put on the shoe, open all Velcro fasteners and re-
move the toe cap by undoing the Velcro fasteners at
the edge of the shoe. Put your foot in the shoe and
close the Velcro fastener over the toes.
2
If required, the toe cap can be fitted to the edge of
the shoe again using the Velcro.
3
Close the Velcro tape over the instep in such a way
that the tongue of the toecap is beneath it if ap-
plicable. Then close the Velcro tape at the ankle by
pulling it through the provided eyelet and fastening
it. Please ensure that the product is secure but not
too tight in order to prevent pinching.
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would
like to thank you for putting your trust in
us. Please take a moment to read through
this product information carefully to
ensure optimum effectiveness of your
Dynamics product.
Ofa Bamberg wishes you a speedy
recovery!
Please note
– The initial adjustment and strapping on of the
product must be carried out by qualified specialist
staff. It might be necessary to make adjustments
for uneven leg lengths.
– Do not wear the products directly on injured skin.
Daily bandage checking is recommended for pa-
tients with polyneuropathy (nerve disease) in the
feet.
– Do not drive a car or any other vehicle whilst
wearing the shoe.
– If you experience an unpleasant sensation, in-
tense pain or any other problem when wearing
the product, then contact your doctor or specialist
supplier immediately.
– We use a comprehensive quality assurance system
to check our products. However, should there still
be reasons for complaint, please contact your spe-
cialist supplier.
