AUSTRALIAN STANDARDS COMPLIANCE
WARNING: TO PREVENT FALLS THE
MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION
BEFORE THE CHILD CAN SIT UP
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which
measures 700 mm wide by 1300 mm long and 120 mm in thickness.
The width and length are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm. This is to minimize the risk of a child’s limb
becoming caught in the gap.
The thickness of the mattress has been specified to ensure that the depth of the cot is greater than
500 mm with the mattress base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
• FAILURE TO FOLLOW THESE WARNINGS
AND THE ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR
DEATH.
• BEFORE EACH USAGE OR ASSEMBLY,
INSPECT COT FOR DAMAGED HARDWARE,
LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES. DO NOT USE COT IF ANY
PARTS ARE MISSING OR BROKEN. ASK
YOUR DEALER OR WRITE TO KIDO
AGENCIES FOR REPLACEMENT PARTS
AND INSTRUCTIONAL LITERATURE IF
NEEDED. DO NOT SUBSTITUTE PARTS.
• WHEN CHILD IS ABLE TO CLIMB OUT OR
REACH THE HEIGHT OF 90 CM , THE COT
SHALL NO LONGER BE USED.
• ENSURE THE COT IS PLACED AT A
REASONABLE DISTANCE FROM CURTAINS,
BLINDS,
HEATERS AND POWER POINTS.
• KEEP MEDICATION, STRING, ELASTIC,
SMALL TOYS OR SMALL ITEMS, SUCH AS
MONEY, OUT OF REACH FROM ANY
POSITION IN THE COT.
• IF REFINISHING, USE A NON-TOXIC FINISH
SPECIFIED FOR CHILDREN’S PRODUCTS.
• DO NOT USE A WATER MATTRESS WITH
THIS COT
• UPON COMPLETION OF ASSEMBLY, BE
SURE ALL SCREWS AND BOLTS HAVE
BEEN TIGHTENED SECURELY.
• A PERIODIC CHECK SHOULD BE MADE OF
ALL SCREWS AND BOLTS AND
RETIGHTENED IF NECESSARY.
• NEVER USE PLASTIC SHIPPING BAGS OR
OTHER PLASTIC FILM AS MATTRESS
COVERS BECAUSE THEY CAN CAUSE
SUFFOCATION.
• DO NOT DRAG COT.
• AFTER COT HAS BEEN COMPLETELY
ASSEMBLED, STORE INSTRUCTION SHEET
IN THIS POUCH.
• UNDER NO CIRCUMSTANCES SHOULD
THIS WARNING BE REMOVED FROM
MATTRESS SUPPORT!
3
