Description
1.6 Spare
parts
Description
Size
Cat.Nr.
Oil filter standard
710 18 850
Exhaust filter
9 714 31 120
Set of seals
FKM
9 714 64 950
Repair set
9 714 64 960
Module kit
G2"
9 714 47 390
Module kit
NPT2"
9 714 58 970
1.7 Lubricants
&
grease
Unless otherwise specified on the pump, we recommend to run the Sogevac
pumps with GS77 from Oerlikon Leybold Vacuum or an equivalent oil which
meets following requirements and is approved by OLV:
- low vapor pressure, even at high temperatures ;
- flat viscosity curve ;
- minimum water content and absorption ;
- good lubricating properties ;
- resistant to aging under mechanical strain.
If you use a non-approved oil, we cannot guarantee that our pumps will meet
their operating specifications (ultimate pressure, pumping speed, operating
temperature, etc). However, the warranty is voided only if the nonapproved oil
adversely affects the operation or reliability of the pump.
When using other oil brands, employ nondetergent mineral oils of viscosity class
ISO VG68 to ISO VG 100.
Use of other special-grade lubricants for specific applications is possible. Please
consult us.
Only use lubricants and grease which have been fully qualified by Oerlikon
Leybold Vacuum.
Pump oil GS77
Ref. No
Grease
Ref. No.
5 liters
711 17 774
400 gr
711 17 700
25 liters
711 17 776
200 liters
711 17 779
1.8
Manipulation and stock
Pumps which have been filled with operating agent must only be moved in
the upright position (horizontally). The angle of slope may not be over 10° max.
Otherwise oil may escape. Avoid any other orientations during transportation.
Check the pump for the presence of any oil leaks, because there is the danger
that someone may slip on the oil which has leaked from the pump. Only use the
lifting lugs which are provided on the pump to lift the pump with the specified
lifting devices.
Caution
Warning
13
GA02330_002_06 - 01/2010 - © Oerlikon Leybold Vacuum
