Oemtools 87009, Operating Instructions And Parts Manual

Page: 3 / 4

3
Operating Instructions and Parts Manual 87009
2/19
2019 OEMTOOLS ™
NO-SPILL
COOLING SYSTEM FUNNEL
SPECIFIC PRODUCT WARNINGS
WARNING
:
Read the product manual and vehicle
maintenance manual prior to attempting operation.
WARNING :
Allow engine to cool prior to removing the
radiator cap. Coolant under pressure can cause personal
injury.
WARNING :
DO NOT attempt to force the adapters or
fittings onto applications for which this product is not
intended.
WARNING :
Always ensure a positive seal between the
adapters, extensions and funnel prior to adding fluid to the
system.
WARNING :
Always be cautious of moving parts and pinch
points when servicing vehicles.
INSTRUCTIONS
1. Install the appropriate adapter and cap to the radiator
or coolant tank.
2. Press the funnel into the adapter. If an angled adapter
and/or extension is needed, it must be installed prior to
installing the funnel.
3. Slowly pour coolant into the funnel until the funnel is
approximately 1/3 full.
4. With the funnel attached, start the engine.
WARNING
: DO NOT increase engine speed above idle;
higher RPM can cause overflow.
NOTE : If the fluid level should rise excessively, shut the
engine off and wait for the fluid level to lower.
5. Add coolant until the cooling system is full.
6. If fluid remains in the funnel, squeeze and hold the large
radiator hose while pressing down the fluid stopper into
the closed position.
7. Remove the funnel and empty the remaining fluid into
an appropriate container.
8. Remove adapters and reinstall the cooling system cap.
9. Dispose or recycle fluid in accordance with local, state
and federal laws.
MAINTENANCE
1. Always store the Cooling System Funnel in a well-
protected area where it will not be exposed to
inclement weather, corrosive vapors, abrasive dust, or
any other harmful elements.
2. Keep the Cooling System Funnel clean for better and
safer performance.
PRODUCT LAYOUT
(A)
(B)
(C)
(D)
(D)
(E)
(F)
(J)
(H)
(G)
(K)
(L)
(M)
(N)
(I)
Figure Description Qty.
A Funnel 1
B Lid 1
C Stopper 1
D Angled Extensions 2
E Straight Extension 1
F Large Threaded Adapter for GM 1
G Large Threaded Adapter 1
H Medium Threaded Adapter 1
I Medium Adapter for Ford 1
J Small Adapter 1
K Large Cap 1
L Medium Cap 1
M Small Cap 1
N Threaded Cap 1
PARTS LIST