20
DV
D
SAFETY WARNING
The video display of the in-dash unit will not operate while the vehicle is moving.
As a safety feature,
“ENGAGE PARKING BRAKE
” blue screen will show on the display when the
vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the
PARKING BRAKE
is active, however,
DVD
and
AV1
audio can be heard while the vehicle is in
motion without engaging the parking brake.
This is a safety feature to prevent driver distraction. It is illegal in most states for the driver to view
video while the vehicle is in motion. Refer to local laws in your area.
Front Monitor Video Initialization
Follow this two initialization procedure carefully to allow video playback on
TY-6300SD
front panel
monitor:
There are usually two situations that start the
PARKING BRAKE
Sequence.
Initializing Parking Brake Scenario 1
First situation is while driving:
Stop vehicle, put in Park, make sure
PARKING BRAKE
is off / released
Depress
PARKING BRAKE
for 2 to 3 seconds
Release
PARKING BRAKE
for 2 to 3 seconds
Depress
PARKING BRAKE
permanently
Once above procedure 1-4 is completed, approx 3 sec—video will display.
Initializing Parking Brake Scenario 2
Second situation is while already parked and the
PARKING BRAKE
is already depressed:
Keep vehicle in Park,
PARKING BRAKE
should be off
Release
PARKING BRAKE
for 2 to 3 seconds
Depress
PARKING BRAKE
for 2 to 3 seconds
Release
PARKING BRAKE
for 2 to 3 seconds
Depress
PARKING BRAKE
permanently
•
•
•
1)
2)
3)
4)
1)
2)
3)
4)
5)
CAUTION !!!
IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS
DISPLAYED IN THE DRIVERS VIEWING AREA.
ENGAGE EMERGENCY BRAKE
TO ENJOY VIDEO
Once 2nd procedure is completed, approx 5 sec—video will display.
This procedure will have to repeated if the IGN is turned off.
The transition time must be less than 2 seconds between depressed and released.
•
•
•
Notes:
Initializing Parking Brake
