background image

Part I – Understanding Speakers and 
Determining Placement 

 

Which speakers are right for you? 

 

Rectangular speakers

 look and work great on walls and on vaulted 

ceilings.  They feature a small “knock-out” on the baffle.  This may be 
used to place an industry standard infrared receiver-repeater for carrying 
remote control commands to the stereo equipment center. 
 

Round speakers

 are great on ceilings and are somewhat out of place on 

vertical surfaces.  The 

SC-622

 and 

SC-822

 single point stereo speakers 

have been designed with stainless steel grilles and hardware to stand up 
well outdoors and in humid environments such as bathrooms, laundry 
rooms, outdoors in eaves, etc. 
 

The CS-516

 indoor-outdoor cabinet speakers are very versatile and 

attractive.  Available in white and black, their cabinets are made of high-
grade polypropylene composite with a powder coated aluminum grille 
and include brackets that enable the speakers to be pointed up and down 
or side to side.  The brackets may be removed for bookshelf placement.  
These speakers are capable of weathering the storm and the heat.  They 
are rated for a –50° F to +200° F temperature range and high humidity.  
They are covered by a 5-year unconditional corrosion guarantee. 
 
Use on surfaces which cannot be penetrated or for areas where it is 
preferable that they not be penetrated.  Concrete walls and ceilings are 
examples of surfaces which cannot be penetrated.  Exterior walls are an 
excellent example of walls which may be penetrated, but it is sometimes 
preferable that they not be. 
 
Cabinet style speakers are excellent for use under eaves for delivering 
music to outdoor activities.  They are also very useful for placement on 
the ceiling or high on a wall, as they can be pointed downward or down 
and across to cover the listening position(s) with a full sound field. 
 
The CS-516 has been designed to withstand harsh environments and is 
suitable for marine applications. 
 
Keep the two colors in mind when deciding how to layout your system 
when using cabinet speakers.  The black speakers are virtually invisible 
when placed high on dark colored ceilings.  The white models will fare 
better than the black if in frequent exposure to the sun as white reflects 
heat and black absorbs it. 
 
 

Summary of Contents for CS-516-B































Reviews: