EMBEDDED
PLC BL2500 User’s Manual
Getting Started
OEM Technology Solutions
Page 8
2.2.1 Installing ISaGRAF Workbench V3.50
Use the following procedure to install the
EMBEDDED
PLC - ISaGRAF Workbench V3.50 from the CD-
ROM:
1. Insert the CD-ROM and open the
ISaGRAF_V3.50
folder.
2. Double-click
on
ISAGRAF.EXE
to launch the ISaGRAF installation wizard. Follow the instructions
provided by the wizard to proceed with the installation.
"
Note:
It is recommended that the ISaGRAF Workbench be installed on a new directory to avoid
confusing files with files from other ISaGRAF versions.
3. Once all the ISaGRAF files have been copied, the following group is added to your Programs group:
2.2.2 Installing
EMBEDDED
PLC Board Support Package (BSP) for BL2500
Use the following procedure to install
EMBEDDED
PLC BSP for BL2500 from the CD-ROM:
1. Go
to
BL2500C_BSP_V1.04_9-0003-006
folder located in the root directory of the CD-ROM.
2. Open
the
ISaGRAF
folder and double-click on
INSTALL.EXE
to launch the ISaGRAF installation
wizard. Enter the location where the ISaGRAF Workbench was installed (default
C:\ISAWIN
) and
press
Install
. The installation wizard will update the ISaGRAF main directory with the I/O boards, C
functions, C function blocks and sample applications for the
EMBEDDED
PLC BL2500 target.
2.3 LICENSING THE ISAGRAF WORKBENCH
The ISaGRAF V3.50 Workbench you just installed runs for a trial period of 30-days before requiring
licensing. When not licensed, you can not create, modify or export IEC programs to a library, or export
variables to ASCII text file.
You can license ISaGRAF using either hardware or software license. When using a hardware license, a
dongle which you place on the parallel or USB port of your PC is delivered pre-programmed with the
selected feature set. When using software license, you need to obtain a set of registration keys.
The software license is specific to a PC (hardware configuration and Operating System). Therefore if you
re-install the Operating System and then re-install ISaGRAF Workbench a new software license will be
required. However, it is possible to transfer a software license from one PC to another. Section A.1.2.2 of
the ISaGRAF User’s Manual (See [2]) and the License Manager on-line help describe in detail how to
transfer a software license.
The
EMBEDDED
PLC Application Kit entitles you to a 32 I/O points software license. To obtain the software
license follow these instructions:
3. Open the ISaGRAF License Manager (
Start
menu
→
Programs
→
ISaGRAF 3.5
→
Licensing
). On
the Available Components select
ISaGRAF 3
Software License
and press
Add
button. Click
Option
32
on
Number of IO Variables
box and
press
OK
button. The Setup Code
SET: WDX32-
WDE15
will be displayed in the
Setup Code
box.