5
Operating Instructions and Parts Manual
24666
11/18
2018 OEMTOOLS
™
1/2" DRIVE IMPACT WRENCH
ASSEMBLY AND OPERATION
INSTALL SOCKET
WARNING
:
Use only impact sockets and acces-
sories that are designed for use with an Impact Wrench.
DO NOT use chrome plated sockets and accessories.
Chrome plated sockets and accessories are designed for
hand use only and MUST NOT be used with an Impact
Wrench. They may shatter and possibly cause serious
injury.
To install a socket, press the square portion of the socket
(1) onto the square drive (2) of the Impact Wrench (see Fig.
1). NOTE: Slide the socket fully onto the square drive so
the socket retainer (3) will hold the socket firmly in place.
FORWARD/REVERSE SWITCH
This Impact Wrench is equipped with a rocker style
forward/reverse switch (1) (see Fig. 2).
1. To operate the Impact Wrench in the forward direction,
press and hold the bottom part of the switch (2). This
direction of rotation will tighten the fastener.
2. To operate the Impact Wrench in the reverse direction,
press and hold the top part of the switch (3). This
direction of rotation will loosen the fastener.
Figure 2
REMOVING FASTENERS
1. Install the correct size of impact socket on the Impact
Wrench.
2. Plug the Impact Wrench power cord into an appropriate
power source.
3. Grasp the Impact Wrench handle with one hand and
the front housing of the Impact Wrench with the other
hand.
4. Place impact socket onto the fastener.
NOTE: Make sure the socket is fully engaged with the nut
to avoid potentially damaging the socket or the wheel
nut.
5. While holding the tool with a firm grasp, pull on the top
part of the forward/reverse switch.
