OEG EcoComfort, Manual

Page: 35 / 84

35 EcoComfort
6. Operating modes/Setting the operating mode
By pressing button 9, the set value is reduced by an hour, by
pressing button 8, it is increased by an hour. After the adjustment,
press button 9 twice for 3 seconds and the setting option for
minutes is available (LED 5 is on). By pressing button 9, it is
increased by a minute.
By pushing button 9 three times for a longer time, the setting of the
next operating period is available. Example: After F0 is set, the
setting for F1 is next. The same applies to the other time periods.
Step 3:
Quitting the setting mode:
If all periods from F0 to F6 are displayed, you can quit the setting
mode by pushing buttons 8 and 9 for 3 seconds. The time is
indicated subsequently.
The setting range for the periods is 24 hours. The hours can be
adjusted from 0 up to 23, the minutes from 0 up to 59.
After finishing the setting and quitting the mode, the device
indicates the hour and minute alternately.
Example: When 8 appears for 8:30, LED 5 is on and LED 6 is on for
30.
When 13 appears for 13:25, LED 5 is on and LED 6 for 25. The
change between hour and minute is every 2 seconds.
High-efficiency drinking water circulation pump
GB