This function is for programming the Start/Stop timing. Up to 3 different Start/Stop ti-
mings can be configured. The setting is as follows:
Step 1:
Select the programme to be configured:
Press twice to select programme 1.
Press three times to select programme 2.
Press four times to select programme 3.
Step 2:
Press to programme the start time.
Step 3:
Adjust the hours with the buttons and .
Step 4:
Press to select the minutes.
Step 5:
Adjust the minutes with the buttons and .
Step 6:
Press to programme the stop time.
Step 7:
Adjust the hours with the buttons and .
Step 8:
Press to select the minutes.
Step 9:
Adjust the minutes with the buttons and .
Step 10:
Press to validate the programme.
Step 11:
Press to return to the main screen.
The display automatically returns to the main screen after 10 seconds.
Refer to the following section to activate the programme:
65
Programming Start/
Stop of timer
4.7
Swimming pool heat pump
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
GB
