OE Max Controls CSDP Plus, User Manual

Page: 145 / 254

147
SEt-26 Internal Speed Command 1
Internal Speed Command 1
• Setting range: 0 to 5000 RPM
• User Default: 100
• Changes anytime
There are four different input signals dedicated to multi level speed
control.
• /C-DIR
• /C-SP1
• /C-SP2
• /C-SP3
The revolution direction is forward direction when /C-DIR signal is OFF,
reverse direction when it is ON.
/C-SP1, /C-SP2, /C-SP3 signals can be combined in eight different ways
for which revolution speed can be determined. The motor’s revolving
direction can be controlled separately by engaging /C-DIR input to
each speed designated to each speed command parameter.
In the multi level speed control mode, the motion of the motor
changes according to the input signal.
Set the acceleration time and deceleration time within the range that
won’t undermine the response of the system in order to ease the
impact of speed change.